Small Mold Molded Rotor Housing

Share
Share

Description: This part is center gated on the 1.237″ (3.14 cm) ID. There are 16 staking tabs that are .016″ (.41 mm) thick and .098″ (2.49 mm) tall that are tough to fill. The tolerances are very tight with call outs of .006″ (.15 mm) parallelisms and flatness of .007″ (.18 mm).

Material: PPA (example shown is Acrylic)

Market Segment: Automobilelektronik

Core Group: Spritzguss von kleinen Teilen

CLICK HERE TO SEE GENERAL DESIGN GUIDELINES